Home - Sales - Custom Fixtures - Repairs - Service - Inventory - Lasermike Repair

 

Pre-owned           Systems 

Lasermike repair      

 
Microtex Electronics Inc
888-251-4503    386-426-1922    Fax 386-426-2056
  Since 1996    14 years  "At your service" 
 				              A Florida Corporation

Refresh this page to insure you are looking at the most current information

 

Filtrona FLM-200E    $3000.00

With the Filtrona Circumference Gauge Fixture

for measuring cigarette filters or your parts/samples up to 9mm

  • Measure your samples from 5mm – 9mm

  • Hit run – fixture spins sample 360 degrees in about 1 second

    •

  •        reads sample 100 times and displays circumference

  • Repeatability / accuracy .005mm

  • Bi-directional RS232 port

  • Centronics compatable printer port 36 pin female

    •

  • This unit will also measure outside diameter up to an inch.

Includes manual and 1-year parts and labor warranty

$4500.00 

Lasermike 182-11 processor with a model 163 dual axis scanner

          

  • 163  Repeatability +/-  .00005  

    • Linearity +/-  .00007                        

    • Measurement range from .01500 -1.0000 inches

    • 182-11  Closed loop control SPC processor high-resolution 5" black and white CRT. Video output provides remote viewing of data. Monitors part dimension, collects statistical data, offers RS 232 serial port, offers printing. Charts, max, min, Range, Deviation. Multiple Libraries. Control and alarm outputs.

      •  

     Dual 501 scanner & 1000 Processor

        

    $5400.00

    Measure up to 32" by adjusting the space between scanners.

    • 1000 SPC processor monitors part dimension, collects statistical data, offers RS 232 serial port, offers printing. Charts, max, min, Range, Deviation. Multiple Libraries.

    • Includes cables, manual and 1-year parts and labor warranty

      •

    Model 79 & 182 Processor

       

    Resolution .0001 Repeatability +/- .0003 Linearity +/- .0003
    Measurement range from .05000 - 5.5000 inches
     182 offers rs232, printer port, various SPC capabilities/charts
    Includes manual & Includes one year parts and labor warranty
     

    $6200.00

    Model 183-195 Benchmike

    with large 3-jaw auto-rotating chuck

    •  

    • Measurement Range .02500" – 1.9500"

    • Repeatability Linearity +/- .00005 inches.

    • These units read in inches or millimeters

    • 16 individual parameter libraries

    • Includes manual and 1-year parts and labor warranty

    • $4000.00

      Beta Lasermike Endura 201-100 Dual axis scanner & 1021 processor

       

    •           

    • 1021                          201-100   

      •  
      •

    • 201-100  Repeatability +/-  .00001  Linearity +/-  .00002

    • Measurement range from .01000 -1.0000 inches

      •

    • 1021 SPC processor monitors part dimension, collects statistical data, offers RS 232 serial port, offers printing. Charts, max, min, Range, Deviation. Multiple Libraries.

      System can be sold with either 1021 or Lasermike 192-11 Processor, same price

    • 192-11    High-resolution 5" black and white CRT.

    • Video output provides remote viewing of data.

    • (you can set up a TV monitor for operator viewing)

    • Monitors part dimension, Tolerance checking, alarm outputs for out of tolerance conditions - Collects statistical data & offers a variety of SPC collection reports, automatically or on-demand

    • 29 Libraries    Control outputs     RS232 serial port     Printer port

      •

    •  

    • Includes cables, manual and 1-year parts and labor warranty

    • $5000.00

      •

      Lasermike 501 scanner & 1020 processor

    •     

    • This unit has an octagon motor, reads 200 - 400 scans per/sec.

    • Great for a fast moving extrusion line

    • 501-195  Repeatability +/-  .00004  Linearity +/-  .00004

    • Measurement range from .02500 -1.9500 inches

    1020 SPC processor monitors part dimension, collects statistical data, offers RS 232 serial port, offers printing. Charts, max, min, Range, Deviation. Multiple Libraries.

    Includes cables, manual and 1-year parts and labor warranty

    $4200.00 

    Mitutoyo LSM-6100 & 503H

    6100 offers Tolerance and Multi-limit settings
    Set point / Offset / Zero-set, Mastering
    Sample measurement & Statistical processing

    • 503H high speed scanning

    • measurement range .01200" - 1.1800"

    • 1600 scans per second

    Very good condition

    $3000.00

     

    Lasermike 192-10 processor with a model 101-100 scanner

           

    • 101-100 Repeatability +/-  .00007  Linearity +/-  .00007                        

    • Measurement range from .02500 -1.0000 inches

      •

    • 192-10    High-resolution 5" black and white CRT.

    • Video output provides remote viewing of data.

    • (you can set up a TV monitor for operator viewing)

    • Monitors part dimension, Tolerance checking, alarm outputs for out of tolerance conditions - Collects statistical data & offers a variety of SPC collection reports, automatically or on-demand

    • 29 Libraries    Control outputs     RS232 serial port     Printer port

     $4200.00

      

    Model 183B-100E Benchmike

    $3800.00

    • Measurement Range .00300" – 1.0000"

    • Repeatability Linearity +/- .00003 inches.

    • These units read in inches or millimeters

    • 16 individual parameter libraries

    • Includes manual and 1-year parts and labor warranty

    • Automatic Zero-chuck add $600.00

    Lasermike 501 scanner, 182-10 processor & motorized pot

        

             $4600.00

    control extruder or puller

    • 501-195  Repeatability +/-  .00004  Linearity +/-  .00004                        

    • Measurement range from .02500 -1.9500 inches

    • 182-10    High-resolution 5" black and white CRT.

    • Video output provides remote viewing of data.

    • (you can set up a TV monitor for operator viewing)

    • Monitors part dimension, Tolerance checking, alarm outputs for out of tolerance conditions - Collects statistical data & offers a variety of SPC collection reports, automatically or on-demand

    • 29 Libraries    Control outputs     RS232 serial port     Printer port

      •  
    On a Budget?  
    We offer interest free monthly payments
    to qualified customers

    Click here to be notified when inventory is updated 

      $5200.00 

      Lasermike 182 processor with a model

      263-195 dual axis scanner

          

    263  Repeatability +/- .00005

    •              Linearity +/-  .00010                        

    • Measurement range from .01500 -1.9500 inches

      •

    • 182-11  Closed loop control SPC processor high-resolution 5" black and white CRT. Video output provides remote viewing of data. Monitors part dimension, collects statistical data, offers RS 232 serial port, offers printing. Charts, max, min, Range, Deviation. Multiple Libraries. Control and alarm outputs.

    Click here to be notified when inventory is updated   

     

      888-251-4503       386-426-1922

    Call 386-426-1922 - toll free 888-251-4503 to order.     

    "Pay at Order" with your charge, check or transfer and get 5% off any system

     

    $3800.00 

    • Lasermike 182-11 dual axis processor &

    •  Lasermike 61-00 dual axis scanner

              

    • 61-00  Repeatability +/-  .00003  Linearity +/-  .00003

    • Measurement range from .00300 -.50000 inches

    182-11  Closed loop control SPC processor high-resolution 5" black and white CRT. Video output provides remote viewing of data. Monitors part dimension, collects statistical data, offers RS 232 serial port, offers printing. Charts, max, min, Range, Deviation. Multiple Libraries. Control and alarm outputs.  

    888-251-4503       386-426-1922

    Call 386-426-1922 or toll free 888-251-4503 to order.     

    Lasermike model 60-05 scanner and 700 processor. 

    $2300.00 

           

       A versatile system covering a range up to .60000"   You can monitor OD on an extrusion line or add a V block and measure samples or gage pins in a lab setting.  This system is capable of sending alarm outputs that can trigger a variety of items; sprayer, alarm lights or buzzer when a product goes above or below programmed tolerances, prints in process or sample and batch reports.

    • Measurement range of .00300 - .65000 inches  

    • Resolution / Linearity  +/- .00003"  

    Displays  or prints reports showing avg. min. max. difference, # of readings etc.  RS232 serial out and printer port

     

    Lasermike model 50 scanner and 700 processor. 

    $2200.00 

           

       A versatile system covering a range of .02500" up to 1.7500"   You can monitor OD on an extrusion line or add a V block and measure samples or gage pins in a lab setting.  This system is capable of sending alarm outputs that can trigger a variety of items; sprayer, alarm lights or buzzer when a product goes above or below programmed tolerances, prints in process or sample and batch reports.

    • Measurement range of .02500 - 1.950 inches  

    • Resolution / Linearity  +/- .0001 in.  

    Displays  or prints reports showing avg. min. max. difference, # of readings etc.  RS232 serial out and printer port

    "Pay at Order" with your charge, check or transfer and get 5% off any system

    questions or quote? email us.

     

    Click here to be notified when inventory is updated    

               

    $3500.00 

    192-10 Processor with a  Lasermike 60-05 scanner

       High-resolution 5" black and white CRT.                                       

    • Video output provides remote viewing of data. (you can set up a TV monitor for operator viewing)

    • Monitors part dimension, Tolerance checking, alarm outputs for out of tolerance conditions - Collects statistical data & offers a variety of SPC collection reports, automatically or on-demand

    • 29 Libraries    Control outputs     RS232 serial port     Printer port

    • Your choice of scanners

    • 500 Scanner measurement range from .00300" - .65000" inches  Repeatability +/- .00005  Linearity +/- .00005

    • Price includes shipping to continental USA

    • Manual, cables & one year parts and labor warranty

    • Glass logic option gives this system the ability to  read transparent objects.  Add $400.00 per system

    •  

    Call 386-426-1922 or toll free 888-251-4503 to order.     

    Click here to be notified when inventory is updated    

     

    questions or quote? email us.

     

    "Pay at Order" with your charge, check or transfer and get 5% off any system

    "Pay at Order" with your charge, check or transfer and get 5% off any system

    Model 183-04 Benchmike

    $2600.00

    • Measurement Range .01000" – .60000"

    • Repeatability Linearity +/- .00003 inches.

    • These units read in inches or millimeters

    • 16 individual parameter libraries

    • Includes manual and 1-year parts and labor warranty

    Questions? Drop us a line.

      Lasermike 1020 processor with a model 101-100 scanner

             

      • 101-100 Repeatability +/-  .00007  Linearity +/-  .00007                        

      • Measurement range from .02500 -1.0000 inches

      1020 SPC processor monitors part dimension, collects statistical data, offers RS 232 serial port, offers printing. Charts, max, min, Range, Deviation. Multiple Libraries. $4200.00

     

    Model 183-195 Benchmike

    • $3600.00

    •  

    • Measurement Range .02500" – 1.9500"

    • Repeatability Linearity +/- .00005 inches.

    • These units read in inches or millimeters

    • 16 individual parameter libraries

    • Includes manual and 1-year parts and labor warranty

    • Stationary "V" Block add $250.00 

    • Adjustable "V" block add $500.00

    • Call or email us now

      •

     

    • Keyence 3100 & 3060 scanner

      •

    • This Keyence system has a measuring range of 1 mm to 60 mm and a 2.5 ms response speed.  Reads in mm or inches.  offers RS232 output.  It measures a large variety of targets ranging from extra fine optical fibers to larger diameter tubes with high accuracy and even detects transparent objects. Easy calibration - High resolution and accuracy.  Scanner is modular - we'll mount the scanner and receiver to a rail for you if you need it.

      •

    • Only $1800.00

    • Call or email us now

    • One available at this price

     888-251-4503       386-426-1922

    Call 386-426-1922 - toll free 888-251-4503 to order.     

    "Pay at Order" with your charge, check or transfer and get 5% off any system

    Lasermike 1020 processor with a model 101-100 scanner

           

    • 101-100 Repeatability +/-  .00007  Linearity +/-  .00007                        

    • Measurement range from .02500 -1.0000 inches

    1020 SPC processor monitors part dimension, collects statistical data, offers RS 232 serial port, offers printing. Charts, max, min, Range, Deviation. Multiple Libraries. $4200.00

     

    Lasermike 192-10 processor with a model 101-100 scanner

           

    • 101-100 Repeatability +/-  .00007  Linearity +/-  .00007                        

    • Measurement range from .02500 -1.0000 inches

      •

    • 192-10    High-resolution 5" black and white CRT.

    • Video output provides remote viewing of data.

    • (you can set up a TV monitor for operator viewing)

    • Monitors part dimension, Tolerance checking, alarm outputs for out of tolerance conditions - Collects statistical data & offers a variety of SPC collection reports, automatically or on-demand

    • 29 Libraries    Control outputs     RS232 serial port     Printer port

     $4200.00

          

    Lasermike 1020 processor with a model 100-050 scanner

           

    • 100-050 Repeatability +/-  .00004  Linearity +/-  .00004                        

    • Measurement range from .00500 -.60000 inches

    1020 SPC processor monitors part dimension, collects statistical data, offers RS 232 serial port, offers printing. Charts, max, min, Range, Deviation. Multiple Libraries. $3900.00

     

    $4200.00 

    Lasermike 1020 processor with a model 162 scanner

              

    • 162  Repeatability +/-  .00004  Linearity +/-  .00006                        

    • Measurement range from .01500 -1.00000 inches

    • 1020 SPC processor monitors part dimension, collects statistical data, offers RS 232 serial port, offers printing. Charts, max, min, Range, Deviation. Multiple Libraries.

    • Includes cables, manual and 1-year parts and labor warranty

    $2800.00 

    Lasermike 800 Smartbox with a model 162-100 scanner

                     

    162  Repeatability +/-  .00004  Linearity +/-  .00004

    Measurement range from .00300 -1.0000 inches

    Smartbox processor downloads data directly to your computer via RS 232 serial port. 

    Includes cables, manual and 1-year parts and labor warranty

    Click here to be notified when inventory is updated   

     

    Lasermike model  50 scanner and

    • Read out display. 

     $1600.00  

    • Measurement range of model 50  .02500 - 1.7000 inches  

    • Resolution / Linearity +/-  .00005 in. 

    • Displays outside diameter of individual parts or in process 

    • (lab or extrusion line)  

    $4200.00 

    • Lasermike 182-10 processor &

    •  Lasermike 501-195 scanner

              

    • 501-195  Repeatability +/-  .00004  Linearity +/-  .00004                        

    • Measurement range from .02500 -1.9500 inches

    182-10   SPC processor high-resolution 5" black and white CRT. Video output provides remote viewing of data. Monitors part dimension, collects statistical data, offers RS 232 serial port, offers printing. Charts, max, min, Range, Deviation. Multiple Libraries. Control and alarm outputs.

    $2600.00 

    • LaserMike 700 processor 

    • with 500 scanner

                 

    • 500  Repeatability +/-  .00005  Linearity +/-  .00005                        

    • Measurement range from .02500 -1.9500 inches

    You can monitor OD on an extrusion line or add a V block and measure samples or gage pins in a lab setting.  This system is capable of sending alarm outputs that can trigger a variety of items; sprayer, alarm lights or buzzer when a product goes above or below programmed tolerances, prints in process or sample and batch reports.

    "Pay at Order" with your charge, check or transfer and get 5% off any system

    888-251-4503       386-426-1922

    Click here to be notified when inventory is updated   

     

    888-251-4503       386-426-1922

     

    • Ask about adding a 5, 10 or 20K

    • Motorized potentiometer

    • to your system to control an extruder or puller

    $500.00          

    $4200.00 

    Lasermike 2020 processor with a model 501 scanner

              

    501  Repeatability +/-  .00007  Linearity +/-  .00007

    Measurement range from .02500 -1.9500 inches

    2020 SPC processor monitors part dimension, collects statistical data, offers RS 232 serial port, offers printing. Charts, max, min, Range, Deviation. Multiple Libraries.

    Includes cables, manual and 1-year parts and labor warranty

    Home - Sales - Custom Fixtures   

    Repair - Service - Trade in your surplus

    • 888-251-4503

    • "Pay at Order" with your charge, check or transfer

    • and get 5% off any system

    questions or quote? email us.

    "Pay at Order" with your charge, check or transfer and get 5% off any system

       Click here to be notified when inventory is updated  

     

    Replacement Head Cables for LaserMike Units

    •  12 feet      $175.00

    •  25 feet      $210.00

    •  50 feet      $245.00

    • 100 feet     $290.00

    questions or quote? email us.

     

        

           

    $3300.00 

    Model 500 scanner

    • Measurement range .01500 – 1.9500 inch

    • Resolution / Linearity .00010

    • Physical measurement 23" L x 6" W x 8.5" H

    Model 500 controller, includes motorized pot

    • Offers digital read out

    • Rear panel outputs include

    • Model 59 motorized pot output drivers,

    • A separate clockwise and counterclockwise correction output.

    • A steady state alarm driver/machine output activated on any error condition

    • A normally open output that closes and opens at a 2.5 Hz rate on any error condition

       

    Call 386-426-1922 or toll free 888-251-4503 to order.     

    Click here to be notified when inventory is updated    

         

    $2900.00  

      Lasermike 600 controller & 600 Dual Axis Scanner   

    Range .00300 - .50000 in. Linearity / Resolution +/- .00005  The 600 controller offers closed loop control outputs and digital display: 
       

                questions or quote? email us.

    Home - Sales - Custom Fixtures - Repair - Service - Trade in your surplus

    All systems includes any necessary cables, manual and a one year parts and labor warranty

    Sell us you surplus laser micrometers

    Call 386-426-1922 or toll free 888-251-4503 to order.    Click here to be notified when inventory is updated

    Home - Sales - Custom Fixtures - Repairs - Service

    888-251-4503        386-426-1922          Fax 386-426-2056